EZ-TRAX® Conveyor Systems

EZ-TRAX conveying systems handle a wide variety of bulky materials and scrap handling applications. These range from light duty slider beds to heavy-duty steel belt conveyors and complete turn-key MRF Systems.

Slider Bed Conveyors

Sliderbed Conveyors are friction driven conveyors with a belt supporting bed for low to medium volume bulk material handling applications (2 to 15 tons/hour). These conveyors can be used for baler and compactor feeds, sorting lines, and components of a MRF system.

  • Belt Weights (lbs) - 160, 220, 330
  • Belt Widths (inches) - 24 - 72"
  • Inclines - up to 35°
  • Cleats - Variable
  • Configuration - A, B
  • Applications - Above & Below Grade

Hinge Steel Belt Conveyors

Hinged Steelbelt Conveyors are medium to heavy-duty applications such as pre-crusher
or compactor feeds, paper, solid waste, large scrap baler feeds, mixed waste lines and white goods. Each joint has a tapered roller and chain that rides on a track driven by 5 to 25 HP motors.

  • Inclines - 30° & 35°
  • Cleats - Variable
  • Configuration - A, B, C, D
  • Nose Overs - Horizontal or 10° / 15° Down
  • Applications - Above & Below Grade

Apron & N-Pan Belt Conveyors

Apron & N-Pan Belt Conveyors are for the most demanding, high impact heavy-duty operations such as transfer stations, scrap, MSW and C&D lines, mixed waste lines and abrasive materials (20 to 50 tons/hour). Features include: Apron Pan or N-Pan, 6” and 9” pitch, 7.5 to 25 HP motors, tapered roller bearings, pit covers and variable speed controls.

  • Inclines - 30° & 35°
  • Configuration - A, B, C, D
  • Nose Overs - 10° / 15°
  • Applications - Above & Below Grade

Combination Belt Conveyors

Combination Belt Conveyors are heavy-duty conveyors that feature a chain drive system incorporated with a rubber belt for medium to high volume applications ranging from 5 to 30 tons/hour.

  • Inclines - 30° & 35°
  • Cleats - Variable
  • Configuration - A, B, C, D
  • Nose Overs - Horizontal or 10° / 15° Down
  • Applications - Above & Below Grade

Trough Conveyors

Trough Conveyors are designed to convey material at a higher speed. The rubber belt rides on angled rollers or idlers that form a trough. They can be used for light to medium duty baler, compactor and shredder feed systems.

  • Belt Weights (lbs) - 220, 330
  • Belt Widths (inches) - 24, 30, 36, 42, 48, & 60"
  • Troughs - 20° & 30°
  • Configuration - A, B
  • Speed - Variable

MRF Sorting Line Conveyor Systems

See our MRF Page

  • Sorting Lines
  • Platforms
  • Bins
  • Feed Conveyors
  • Balers
  • Custom Engineering

Also,
Screens, Eddy Currents and Magnetic Separators

Visit our MRF Page